Want to Choose the Right Products for You?
Take a quick test to find the right propeller for you.
MAD AeroMax 60 7.5KV is a heavy-lift UAV power system kit combining an AM60 7.5KV motor, a SineSic 80A Pro industrial ESC and a FLUXER PRO 73×29 carbon fiber propeller. The documented kit specification supports 96S LiPo power systems and lists a 60kg recommended takeoff weight with a maximum thrust of 126.9kg. The AM60 motor uses a 167 × 120.3mm housing and weighs 5.8kg. The ESC supports dual CAN and PWM throttle input, with an 80A continuous output current and 150A peak current for 10 seconds. Confirm battery voltage, propeller installation, motor direction, cooling and aircraft integration before operation.
Heavy-Lift Power System Kit
For 96S LiPo UAV Platforms
AM60 7.5KV Integrated Heavy-Lift Propulsion System
Integrated Heavy-Lift Propulsion
The MAD AeroMax 60 7.5KV kit combines the AM60 motor, SineSic 80A Pro ESC and FLUXER PRO 73×29 carbon fiber propeller into one UAV propulsion system. The documented kit specification lists a 60kg recommended takeoff weight and 126.9kg maximum thrust. Actual system performance depends on battery voltage, propeller configuration, aircraft structure, cooling and operating conditions.
Motor, ESC and Propeller Coordination
The AM60 motor uses a 7.5KV winding and a 167 × 120.3mm motor size. The SineSic 80A Pro ESC supports 200–435V input, dual CAN and PWM throttle control, with an 80A continuous output current and 150A peak output current for 10 seconds. Confirm the 73×29 propeller, 96S battery system, motor direction and complete wiring before installation.
Core Kit Technical Parameters
· Product Type: Heavy-Lift UAV Power System Kit
· Kit Model: AM60-Kit
· Motor Model: AM60
· Motor KV: 7.5KV
· Motor Slot and Pole: 36N42P
· Motor Size: 167 × 120.3mm
· Motor Weight: 5.8kg
· ESC Model: SineSic 80A Pro, 200–435V Industrial Edition
· ESC Size: 198.5 × 88 × 54mm
· ESC Weight: 1532g
· ESC Continuous Output Current: 80A
· ESC Peak Output Current: 150A for 10 seconds
· ESC Communication Interface: CAN ×2, CAN2.0B, 1Mbps
· ESC Throttle Input: PWM, 1100–1900μs
· Lithium Battery Compatibility: 96S LiPo
· Recommended Takeoff Weight: 60kg
· Maximum Thrust: 126.9kg
· Operating Temperature: -20°C to 50°C
· Kit Protection Rating: IP45
· Propeller Model: FLUXER PRO 73×29
· Propeller Material: Carbon fiber and resin
· Propeller Weight: 1680 ±80g
Want to Choose the Right Products for You?
Take a quick test to find the right propeller for you.
Smart ESC and Heavy-Lift System
· AM60 7.5KV heavy-lift motor
· SineSic 80A Pro industrial ESC
· 96S LiPo compatibility
· 80A continuous ESC output current
· 150A peak ESC output current for 10 seconds
· Dual CAN and PWM throttle support
· FOC adaptive control
· OTA tuning and configuration support
· Real-time temperature monitoring
· Recommended takeoff weight: 60kg
· Maximum thrust: 126.9kg
Packaging and Shipping
· Product: MAD AeroMax 60 7.5KV Power System Kit
· Kit contents: One AM60 7.5KV motor
· One SineSic 80A Pro ESC
· One FLUXER PRO 73×29 carbon fiber propeller
· Motor cable: 200mm extended enamel wires
· ESC power cable: 10AWG, 680mm
· ESC signal wire: 9-pin, 1100mm
· ESC temperature sensor wire: 170mm
· Propeller mounting: D25–D50, M6×6, center hole D25
· Kit weight: 9000 ±100g
· Propeller configuration and rotation direction: Confirm before shipment
Need a Custom
Share your UAV requirements. We’ll help evaluate the right propeller solution.
Important High-Voltage Propulsion System Notice
· Confirm that the aircraft power system is compatible with the documented 96S LiPo configuration.
· Confirm the selected propeller, mounting pattern and rotation direction before installation.
· The SineSic 80A Pro ESC specification lists a 200–435V input range; do not connect a battery outside the specified range.
· Confirm motor, ESC, propeller, battery and aircraft load compatibility as one complete propulsion system.
· The stated 60kg recommended takeoff weight and 126.9kg maximum thrust are based on the documented kit configuration and test conditions.
· Provide sufficient cooling and airflow around the AM60 motor and SineSic ESC.
· Confirm CAN/PWM wiring, motor phase wiring, signal wiring and temperature-sensor connections before powering the system.
· Remove or secure the propeller during initial bench testing and configuration.
· The kit specification lists IP45, while the ESC specification lists IPX7; do not treat the complete installed system as fully waterproof without further confirmation.
